IP•Express GE1-DI

WAN Router with Four Integrated E1 DSU/CSUs

- MPEG Video Distribution -

- Branch Office Connectivity -

- Education District Networking -

Product Image

SIZE

9" (L) x 7.3” (W) x 1.50” (H)

Overview

IP•Express GE1-DI is a high performance, bandwidth scalable, WAN router or bridge with 4 E1 ports that have flexible Drop and Insert capabilities.

Point to Point and Frame Relay Wide Area Networking Protocols, with 24/7 proven interoperability, are fully supported on the E1 channels allocated to the internal WAN Router or Bridge.

Standards based WAN protocols, PPP, Multilink PPP, and Frame Relay, ensure interoperability.

IP•Express GE1-DI is a high performance, bandwidth scalable, WAN router or bridge with 4 E1 ports that have flexible Drop and Insert capabilities. Point to Point and Frame Relay Wide Area Networking Protocols, with 24/7 proven interoperability, are fully supported on the E1 channels allocated to the internal WAN Router or Bridge.

The 4 E1 ports are able to independently connect E1 based Telecommunication Equipment and Ethernet LANs to 1 or 2 remote locations.

A WAN Router or Bridge, 1 to 3 E1 Drop and Insert Interfaces and a long haul E1 DSU/CSU are
integrated to create a complete E1 Data and Voice Multiplexor.

E1 WAN Router or Bridge with Drop and Insert Mux

IP•Express GE1 utilizes 4 E1 Telco Circuits to optimally interconnect 4 Remote LANs with IP•Express DLE1s.

Applications

Interconnect Remote LANs and PBXs over E1

IP•Express GE1-DIs are used to connect Branch Office PBXs and Phone switches to an organizations headquarter’s Phone System, which has access to the PSTN, to save money on Local Access Phone charges and interoffice calls. The remote LAN interconneciton to the Headquater's LAN is utilized for centralized database access, shared file servers, print servers, etc...

Remote Management of Telecom Switches

IP•Express GE1-DIs  enable Telecommunication Service Providers to remotely manage their Telecommunication Switches over their E1 connection. Allocation of E1 bandwidth to the LAN interface provides for an always on network connection to the Ethernet Management interfaces of the Telecommunication Switch.

Internet Access and PBX Connection to PSTN

IP•Express GE1-DIs  are the ideal Customer Premise Equipment for Competitive Local Exchange Carriers that are provisioning Internet Access and PBX Connection to the PublicSwitch Telephone Network.

Teleconferencing Equipment Interconnect

IP•Express GE1-DIs provide E1 based Teleconferencing Applications with a very cost effective solution to share a E1 connection with the LAN.

Specifications

LAN Network Interface
  • 10/100 BaseT Ethernet Port
  • Auto-negotiate or ConfiguredSpeed/Duplex
LAN Network Protocols Supported
  • IP, TCP, UDP, RIP, ICMP
  • IP Multicast support
  • IP Video Stream Redundancy (Optional)
WAN Network Interfaces
  • Four E1/FracE1 CSU/DSU ports
  • Inverse Packet Multiplexing (Optional)
WAN Network Protocols Supported
  • PPP (RFC 1548, RFC 1332, RFC 1334, PAP)
  • Multilink PPP (RFC 1990)
  • Frame Relay (ANSI ANNEX D, LMI, RFC 1420)
Routing Protocols Supported
  • RIPv1, Static T1/Fractional T1 Specifications:
  • Framing - ESF or D4
  • Coding - B8ZS or AMI
  • Supports DS0 assignments from 1 to 24 (64Kbps to 1.536Mbps)
E1 Diagnostic
  • Loopback Test
    • Network, Internal, Framer, Payload
  • Bert Tests
    • 2E07,2E11,2E15,QRS
  • TFTP Online Upgrade Capable
    • Fully operational during upgrade
Network Security
  • Full On Source, Destination Address; Port and Flag IP Packet filtering
  • Network, Device and Application Layers.
Dimensions
  • 9" (L) x 7.3" (W) x 1.50" (H)
  • 4 E1 Wan Connectivity in 1/2 of a 1U 19" rack
Management
  • Telnet support with Edit and Paste Templates
  • Console Port for Out of Band Management
  • SNMP support (MIB I, MIB II)
  • Remote configuration, monitoring, & reset
Regulatory
  • Safety -IEC60950
  • EMC - CFR 47 Part 15 Sub Part B:2002 EN55022: 1994 + A1 & A2 EN55024, ICES-003 1997 CISPR 22 Level A
  • Telecom - Part68
  • CE
Power
  • Locking Power Connector
  • 12-24 VDC 1.0A
  • Ships with Universal Adapter
  • Optional -48V 0.25 Amp
  • Hot Standby with 2nd Power Module

Ordering Information

Chassis Slot Card: IP•Express GE1

Rack Mount & Power Supply Options:

BlackGate RS232 Rear
BlackGate RS232 Rear

Part No.

Description

0DI-2048-0x*

IP•Express GE1-DI, *Note: x = specificed number of E1 ports to be enabled (1 to 4)

UDI-2048-0x*

IP•Express GE1-DI E1 Port Upgrade, Enable Additional E1 Ports, *Note: x = specified number of additional E1 ports to be enabled (1 to 4)

Optional Features

Optional Features

IPM

Inverse Multiplexor Option, IPM 3 to 6 Mbps Interconnet over 2,3, or 4 Dedicated T1 WANs

RED

MPEG IP Video REDundancy Switch, Secondary Encoder Traffic passed on failure of Primary Encoder

CMP

ROHS compliant materials and processes, Restriction of Hazardous Substances no Pb

Power Supply Options

Power Supply Options

094-2418

90-220 VAC Universal International/Domestic Adapter

094-2418-R

DUAL REDUNDANT, 90-220 VAC Adapter

094-N48V

Internal Power Module, -48 VDC Screw Terminals

094-N48V-02

DUAL REDUNDANT, -48 VDC Screw Terminals

094-1500

WIREDC Option, +24 VDC Screw Terminals

094-WIREDC-R

DUAL REDUNDANT, +24VDC

Rack Mount Options

Rack Mount Option

095-1000

Rack Mount Kit - for single 7" products (Fits both 19" and 23" racks)

095-2000

2 unit 19" x 1RU Rack Mount Kit for 7" products

094-WIREDC-R

DUAL REDUNDANT, +24VDC

095-3000-RTANG

Right Angle Wall Mount Bracket Kit

So What's Next?

WE’RE READY!

Engage Communication
9565 Soquel Drive. Aptos, CA 95003
This email address is being protected from spambots. You need JavaScript enabled to view it.
This email address is being protected from spambots. You need JavaScript enabled to view it.



Telephone: 1-831-688-1021
Toll Free : 1-877-ENGAGE4
 
 
Designed, Fabricated, and Assembled
in America 
Supported Worldwide