IP•Express DLE1
MUX WAN Router with Two Integrated T1 DSU/CSUs
- MPEG Video Distribution -
- Branch Office Connectivity -
- Education District Networking -
SIZE
9" (L) x 7.3” (W) x 1.50” (H)
Overview
IP•Express DLE1 is a high performance, bandwidth scalable, IP WAN router with 2 E1 ports offering a standards based inverse multiplexing (N x E1) capability.
The 2 E1 ports are able to interconnect to 2 remote locations or optionally to be N x E1 inverse packet multiplexed to remote locations at 3 Mbps. Standards based WAN protocols, PPP, Multilink PPP, and Frame Relay, ensure interoperability.
The IP•Express DLE1 interconnects remote LANs and addresses the large market for connectivity in the multi-megabit bandwidth range such as high quality MPEG Video delivery.
The Integration of the E1 CSUs provides for a complete solution with a straight forward configuration.
E1 Branch Office Connectivity
Applications
Two E1 Inverse Packet Multiplexer
IP•Express DLE1 is a high performance, bandwidth scalable, IP WAN router with 2 E1 ports offering a standards based inverse multiplexing (N x E1) capability. The 2 E1 ports are able to interconnect to 2 remote locations or optionally to be N x E1 inverse packet multiplexed to remote locations at 3 Mbps. Standards based WAN protocols, PPP, Multilink PPP, and Frame Relay, ensure interoperability.
MPEG IP Video Redundancy Switch
REDundant IP Video configuration automatically switches from the Primary to a Secondary Encoder's IP Video Stream for mission critical broadcasts and is available with the IP•Express DLE1-IPM-RED. A one second absence of IP packets from the Primary Encoder results in the switch to the Secondary Encoder. The WAN bandwidth is reserved for a single feed.
MPEG IP Multicast Streaming Video
IP•Express DLE1-IPM models deliver MPEG IP Streaming Video over Inverse Packet Multiplexed E1s. The Inverse Packet Multiplexor provides the bandwidth necessary for the delivery of broadcast quality video feeds for a single MPEG Video. IP Multicast is a standard feature of the IP•Express DLE1 and is utilized to distribute MPEG video simultaneously to multiple decoders.
Specifications
LAN Network Interface
- 10/100 BaseT Ethernet Port
- Auto-negotiate or Configured Speed/Duplex
LAN Network Protocols Supported
- IP, TCP, UDP, RIP, ICMP
- IP Multicast support
- IP Video Stream Redundancy (Optional)
WAN Network Interfaces
- Four E1/FracE1 CSU/DSU ports
- Inverse Packet Multiplexing (Optional)
WAN Network Protocols Supported
- PPP (RFC 1548, RFC 1332, RFC 1334, PAP)
- Multilink PPP (RFC 1990)
- Frame Relay (ANSI ANNEX D, LMI, RFC 1420)
Routing Protocols Supported
- RIPv1, Static
E1/Fractional E1 Specifications
- Framing - ESF or D4
- Coding - B8ZS or AMI
- Supports DS0 assignments from 1 to 24 (64Kbps to 1.536Mbps)
E1 Diagnostic
- Loopback Test
- Network, Internal, Framer, Payload
- Bert Tests
- 2E07,2E11,2E15,QRSS
TFTP Online Upgrade Capable
- Fully operational during upgrade
Network Security
- Full On Source, Destination Address; Port and Flag IP Packet filtering
- Network, Device and Application Layers.
Dimensions
- 9" (L) x 7.3" (W) x 1.50" (H)
- 4 E1 Wan Connectivity in 1/2 of a 19" rack
Management
- Telnet support with Edit and Paste Templates
- Console Port for Out of Band Management
- SNMP support (MIB I, MIB II)
- Remote configuration, monitoring, & reset
Regulatory
- Safety -IEC60950
- EMC - CFR 47 Part 15 Sub Part B: 2002 EN55022:1994 + A1 & A2 EN55024, ICES-003 1997 CISPR 22 Level A
- Telecom - Part68
- CE
Power
- Locking Power Connector
- 12-24 VDC 1.0A
- Ships with Universal Adapter
- Optional -48V 0.25 Amp
- Hot Standby with 2nd Power Module
Ordering Information
Chassis Slot Card: IP•Express DLE1
Rack Mount & Power Supply Options:
Part No.
Description
076-2048-0x*
IP•Express DLE1, *Note: x = specificed number of E1 ports to be enabled (1 to 2)
U76-2048-0x*
IP•Express DLE1 E1 Port Upgrade, Enable Additional E1 Ports (up to 2)
Optional Features
Optional Features
IPM
Inverse Multiplexor Option, IPM 3 to 6 Mbps Interconnet over 2,3, or 4 Dedicated T1 WANs
RED
MPEG IP Video REDundancy Switch, Secondary Encoder Traffic passed on failure of Primary Encoder
CMP
ROHS compliant materials and processes, Restriction of Hazardous Substances no Pb
Power Supply Options
Power Supply Options
094-2418
90-220 VAC Universal International/Domestic Adapter
094-2418-R
DUAL REDUNDANT, 90-220 VAC Adapter
094-N48V
Internal Power Module, -48 VDC Screw Terminals
094-N48V-02
DUAL REDUNDANT, -48 VDC Screw Terminals
094-1500
WIREDC Option, +24 VDC Screw Terminals
094-WIREDC-R
DUAL REDUNDANT, +24VDC
Rack Mount Options
Rack Mount Option
095-1000
Rack Mount Kit - for single 7" products (Fits both 19" and 23" racks)
095-2000
2 unit 19" x 1RU Rack Mount Kit for 7" products
095-3000-RTANG
Right Angle Wall Mount Bracket Kit
