Bell 202T Modem Data to Ethernet IP Packet Convert
Rack Mount and Power Supply Options
Rear Panel: 12/30 VDC ADAPTER (option)
Rear Panel 12/30 VDC with Screw Term Adapter (option)
Rear Panel 12/30 VDC with Negative 48 VDC Screw Term Adapter (option)
IP•Tube SER Bell 202T
Bell 202 T 4-Wire Modem Over IP MPLS Ethernet
IP•Tube SER Bell 202T
Bell 202 T 4-Wire Modem Over IP MPLS Ethernet
SIZE
9" (L) x 7.3” (W) x 1.50” (H)
Overview
Flexible Bell 202 Serial Data Extensions over Packet Networks
The IP•Tube SER 202 T has integrated Bell 202 T modem interfaces that connect to the Bell 202 T 4 Wire modem interface of Data Communication Equipment and transports their serial communication over IP Packet networks. This conversion facilitates a cost effective path for Utility and Pipeline industries to migrate their SCADA communication from end of life analog circuits to Ethernet based LAN/WAN/MAN wired and wireless networks.
Asynchronous Serial Over IP
Asynchronous characters with 5 to 8 data bits, a baud rate 1.2 kilobits, 1 or 2 stop bits, and with or without parity are efficiently encapsulated into IP packets. The latency is controlled by setting the maximum number of consecutive async characters per IP packet.
SCADA Protocol Transparency
The IP•Tube SER 202T transports asynchronous SCADA protocols transparently because of its unique TDM circuit emulation capability. RTU transmit data is encapsulated into IP packets at 64,000 samples per second and de-encapsulated at the far end at the same rate, ensuring proper RTU receive data delivery. Multiple RTUs can be IP multiplexed onto T1 circuits for routing to existing cross-connect and channel bank equipment.
IP•Tube SER 202T Standard Features
Dual LAN Interfaces
All IP•Tube SER 202T models ship with dual 10/100 BaseT Ethernet LAN ports. The dual Ethernet interfaces provide for:
- Management interface on LAN port 2 when LAN port 1 is connected to a VPN tunnel
- Protector Option for Redundant Packet Path connections with Constant or Switch Over Criteria
Assured Delivery Protocol
- Packet out of sequence detection and re-sequencing
- Duplicate skipping
- Lost packet retransmissions with configured delay
IP•Tube SER 202T Optional Features
Protector Option
The protector option utilizes the second LAN interface as a redundant path for the interconnection of the IP encapsulated Bell 202 T data. The extension of the Bell 202T has a fault tolerant link that is configured to always on, or with switch over criteria.
Applications
4-Wire Bell 202 Modem Over IP
Utility and Pipeline industries use 4 wire leased line communication circuits to connect remote SCADA equipment to control centers. A significant number of SCADA Remote Telemetry Units only have integrated 4 wire modem interfaces. The IP•Tube SER 202 T extends the life of proven SCADA systems by converting Bell 202 4 Wire modem interfaces to Ethernet for IP Packet network connectivity.
The IP•Tube SER 202 T interfaces directly to the 4 wire analog interface of the RTU, transparently encapsulates SCADA protocols from the RTU into IP packets, and transports those packets onto the IP network. At the control center, the central site SER Bell 202 Tseamlessly converts the packets back into their original 202T modem data format; or directly to an RS232 DCE interface with an IP•Tube SER RS232.
Specifications
LAN Network Interface
- Two 10/100 BaseT Ethernet Interfaces
LAN Network Protocols Supported
- IP, TCP, UDP, ICMP, Telnet, DHCP, DDNS, SSH Modem
- Bell 202T 4-Wire; RJ45 Crossed Wire for Straight Cable Serial Data
- 1200 Baud Asynchronous
Serial Over IP Protocol
- Async Over IP
- TDM Over IP
- Circuit Extension Services Over IP
Regulatory
- CE
- Safety -IEC60950
- EMC - CFR 47 Part 15 Sub Part B:2002, EN55022: 1994 + A1 & A2, EN55024, ICES-003 1997, CISPR 22 Level A
Quality of Service Support
- IP Type of Service (TOS) CLI configured
- IANA Registered UDP Port 3175
- 802.1p/q mac level prioritization
Management
- Secure Socket Shell - SSH V2
- Telnet support with Edit and Paste Template Files
- Console Port for Out of Band Management
- SNMP Public and Private MIB support with configured traps TFTP Online Upgrade Capable (FLASH ROMs)
- IPTube is fully operational during upgrade
Dimensions
- Dimensions: 9" (L) x 7.3” (W) x 1.50” (H)
Environmental
- IEEE-1613
- -40° to 70°C operating temperature
- Up to 90% operating humidity (non-condensing)
Power
- 12-30 VDC, 1.0A.
- Screw Locking Connector
- Universal Adapter 100/240 VAC 50/60 Hz
- Optional -48V 0.25 Amp
- Hot Standby
Ordering Information
Chassis Slot Card: IP-Tube SER 202T
Rack Mount & Power Supply Options:
Part No.
Description
040-202T-0x*
IP•Tube SER 202T, *Note: x = # of specified MODEMS Ports (1 to 4)
CH-040-202T-0x*
Chassis Slot Card: IP•Tube SER 202T, *Note: x = # of specified MODEMS Ports (2 or 4)
Optional Features
Optional Features
PRO
Protector Option, Fault Tolerant Network Interconnect. The protector option utilizes the second LAN interface as a redundant path for the interconnection of the IP encapsulated data. The extension of the IP-Tube has a fault tolerant link that is configured to always on, or with switch over criteria. Learn more.
Power Supply Options
Power Supply Options
094-2418
90-220 VAC Universal International/Domestic Adapter
094-2418-R
DUAL REDUNDANT, 90-220 VAC Adapter
094-N48V
Internal Power Module, -48 VDC Screw Terminals
094-N48V-02
DUAL REDUNDANT, -48 VDC Screw Terminals
094-1500
WIREDC Option, +24 VDC Screw Terminals
094-WIREDC-R
DUAL REDUNDANT, +24VDC
Rack Mount Options
Rack Mount Option
095-1000
Rack Mount Kit - for single 7" products (Fits both 19" and 23" racks)
095-2000
2 unit 19" x 1RU Rack Mount Kit for 7" products
095-3000-RTANG
Right Angle Wall Mount Bracket Kit
