Flexible Serial Data Extensions over Packet Switch Networks

The IP•Tube SER RS530 converts RS530 data connections, which employ leased circuits, into IP packets that extend the circuit over very cost effective Ethernet based LAN/WAN/MAN wired and wireless networks. The IP•Tube SER RS530 encapsulates Synchronous and HDLC serial data into IP packets. TheIP•Tube SER RS530 is available with one to four RS530 interfaces, configured as DCE or DTE, that facilitate the interconnection of Serial Data Over IP between Bulk Encryptors (KIV7/OMNI), Data Terminals, Data Acquisition Systems, WAN Routers and Bridges....

Layer 1
In Layer 1 operating mode every bit is encapsulated into an IP packet. The size and frequency of the IP packets can be set with data bit rates from 2.4 Kilobits to 2.048 Megabits per second. Latency minimization is accomplished with multidimensional adaptive clock configurations. A configured number of incoming packets are buffered in order to compensate for the packet delivery jitter introduced by the network. The size of this buffer needs to accommodate the peak amount of jitter.

HDLC Over IP
In Layer 2 operating mode HDLC Data frames, such as those used by Wide Area Networking protocols PPP and Frame Relay or proprietary Data Links, are transported within IP packets as HDLC over IP. The latency introduced is dependent upon the clocking rate and the HDLC frame size. Minimum latency is obtained by maximizing the clock rate and minimizing the MTU. HDLC Over IP frames are directly sent out the Serial interface since Clock synchronization is not required. WAN security provisioning, such as firewalling, is maintained.

Dual LAN Interfaces
All IP•Tube SER RS530 models ship with dual 10/100BaseT Ethernet LAN ports. The dual Ethernet interfaces provide for: 

• Management interface on LAN port 2 when LAN port 1 is connected to a VPN tunnel 
• The LAN ports can be configured to support connections over 2 Asymmetrical bandwidth links 
• Alternator Option for load balanced SDSL interconnects 
• Protector Option for Redundant Packet Path connections with Constant or Switch Over Criteria

Assured Delivery Protocol
In order to assure high quality communications over links with intermittent or noisy performance, such as Wireless or Broadband over Power Line, the IP•Tube SER RS530employs Engage’s robust Assured Delivery Protocol with the following benefits: 

• Packet out of sequence detection and re-sequencing
• Duplicate skipping,
• Lost packet retransmissions with configured delay.

The IP•Tube SER RS530, whose synchronous serial interface is configurable as DCE or a DTE, facilitates the transport of bulk data across a combination of IP and WAN infrastructures. The IP•Tube SER RS530's flexibility supports internetworking across varied LAN/WAN/MAN/Satellite networks. The size and frequency of the IP packets can be set with data bit rates from 2.4 Kilobits per second to 2.048 Megabits per second. Latency minimization is accomplished with multidimensional adaptive clock configurations.

The IP•Tube SER RS530 provides a transparent bandwidth regulated IP Tunnel for interconnecting remote Networks. With the IP•Tube SER RS530 WAN security provisioning, such as firewalling, is maintained. WAN Protocols, such as PPP and Frame Relay, that utilize HDLC framing are encapsulated with HDLC Over IP. Broadband Service providers are able to transport Enterprise Wide Area Network connections with inband management of the Committed Information Rates. The IP•Tube SER RS530 IP Tunnel can also be utilized as a secondary path for fault tolerant mission critical applications.

In order to assure that circuits are extended over connections with fault tolerance the IP•Tube SER RS530 has as a standard capability an Assured Delivery Protocol that supports high performance full duplex real time data. The protocol has packet out of sequence detection and re sequencing, duplicate skipping, and real time lost packet retransmission with configured delay.

Management of the IP•Tube SER RS530 is accomplished with a Command Line Interface that is accessed through a Console or Telnet connection. Templates of the most common configuration provide for an Edit and Paste configuration. SNMP MIB I and II support is a standard feature.

All IP•Tube SER RS530 models ship with dual 10/100BaseT Ethernet LAN ports. The dual Ethernet interfaces provide for:
• Management interface on LAN port 2 when LAN port 1 is connected to a VPN tunnel
• The LAN ports can be configured to support connections over 2 opposite ADSL links
• Protector Option for Redundant Packet Path connections with Constant or Switch Over Criteria

The IP•Tube SER RS530's second 10/100BaseT Ethernet interface provides a management port when interconnecting the IP•Tube SER RS530 through a Virtual Private Network. Each LAN interface of the IP•Tube SER RS530 features independent IP network configurations.    

IP•Tube SER RS530 Optional Features