Overview
Voice Encryption |
|
|
The Engage BlackBond T1 is a Commercial Off the Shelf T1 Link Encryptor that utilizes the Advanced Encryption Standard to Secure Sensitive Information Transmitted Over Point to Point or Dial-up T1 Communication Links for: - Department of Defense
- National, State and Local Governments
- Public Safety Networks
- Homeland Security
- Multi-Site Commercial Enterprises
- Financial Institutions
- Health Care Industries
|
Proven Interoperability |
The BlackBond's T1 interface has over a decade of proven interoperability with the full range of T1 communication equipment including: - WAN Bridges and Routers
- PBX Trunks
- Video Codecs
- Voice and Data Multiplexers
- Cellular Base Stations
|
Encryption Method |
The Advanced Encryption Standard (AES) is utilized by the BlackBond to secure T1 circuits, especially Voice Encryption. The AES algorithm is a symmetric block cipher that encrypts and decrypts information. AES is a FIPS approved symmetric encryption algorithm that may be used by U.S. Government organizations (and others) to protect sensitive information. |
Key Management |
Automated key management configurations ensure timely key transitions and eliminate the operational and maintenance costs of managing an encrypted network with manual key distribution. |
Applications
| Applications |
Encrypt Sensitive T1 Communication Links Voice Encryption BlackBond T1 is inserted between the Phone System’s T1/E1 interface and the T1 circuit. The BlackBond T1 operates at Layer 1. In Layer 1 mode it encrypts T1 frames. Voice timeslots within the T1/E1 frames are AES encrypted. The signaling channel, which can be PRI, SS7 or Proprietary, is unencrypted. |
|
Encryption of interoffice voice calls eliminates wiretapping at unsecured phone closets and telecom service provider monitor jacks. AES Circuit Encryption is employed to prevent interception, tampering and disruption of public or private communication channels. The need to employ end to end circuit encryption is a top priority for organizations that are aware of their vulnerability. Circuits from the Phone Company are commonly thought of as private and not accessible or requiring sophisticated equipment to tap.
Ready Access to Communication Channels The vast majority of Telephone calls, Data networks and Video for Surveillance or Conferencing are interconnected over Time Division Multiplexed - TDM circuits from Regional Bell Operating Companies - RBOCs or Postal Telegraph and Telephone - PTTs. Access to these interconnecting circuits can be obtained at the Telco Switching locations. There are numerous Telco switching centers that are unmanned and security at many of the manned locations is minimal and not in place 24 hours per day. Easily thwarted physical security provides ready access to the Telcos built-in TDM diagnostic circuit monitoring jacks. |
Encryption Method |
|
Key Management |
Automated key management configurations ensure timely key transitions and eliminate the operational and maintenance costs of managing an encrypted network with manual key distribution. |
Management An IP Ethernet interface, with SNMP, enables ease of management, configuration, and upgradeability. |
BlackBond Optional Features
|
T1 Protection Switch OPTION -TPS |
The T1 Protection Switch provides an automatic backup for T1 circuits with a second T1. The switch over criteria is configured. |
T1 Link Protector OPTION -LPT |
The T1 Link Protector provides an automatic backup for T1 circuits with T1 Over IP connecting via Wireless Ethernet, Gigabit Ethernet, IP Satellite Services, and xDSL. |
Technical Specifications
Category
|
Specifications
|
| Encryption Algorithm |
| | • | AES 256-bit | | | • | Fully Automatic key management with configured interval |
|
| T1/Fractional T1 Specifications |
| | •
| 1 RED and 1 BLACK T1 | | | • | Integrated CSU Connects to Telco T1 or with a crossover cable to DS1 | | | • | Framing - CRC4 | | | • | Coding - HDB3 or AMI | | | • | Supports DS0 assignments from 1 to 32 | | | • | Not Contiguous Configuration x-y,z
|
|
Supported LAN Network Interface |
| | • | Two 10/100BaseT Full/Half Ethernet | | | • | Auto negotiation or Configured Speed and Duplex
|
|
| LAN Network Protocols Supported |
| | •
| IP, TCP, UDP, ICMP
| | | • | Telnet TFTP Online Upgrade Capable (FLASH ROMs)
| | | • | BlackBond is fully operational during upgrade |
|
| Dimensions |
| | • | 9" (L) x 7.3” (W) x 1.50” (H) |
|
| Environmental |
| | • | 0° to 132° F (-10° to 50°C ) operating temperature | | | • | Up to 90% operating humidity (non-condensing) | | | • | Optional Extended Temperature Range available |
|
Regulatory |
| | • | CE | | | • | Safety -IEC60950 | | | • | EMC - CFR 47 Part 15 Sub Part B:2002, EN55022:1994+A1&A2, EN55024, ICES-003 1997, CISPR 22 Level A | | | • | Telecom TBR12, TBR13 |
|
| Management |
| | • | Telnet support with Edit and Paste Template Files | | | • | Console Port for Out of Band Management | | | • | SNMP support (MIB I, MIB II) with configured traps | | | • | Remote config., monitoring, & reset | | | • | Telco |
|
Diagnostics |
| | • | Local Loop, Remote Loop |
|
| Power |
| | • | 12-30 VDC, 1.0A. | | | • | Optional -48V 0.25 Amp |
|
How to Order
Ordering Information |
 |
| Part No. | Description | Notes |
| | |
| BlackBond T1 Standalone | |
| 007-1544-02 | BlackBond T1 | AES (256 bit key) T1 link Encryptor. T1 Base Model with 1 RED and 1 BLACK T1 Port |
| BlackBond T1 Slot Card | |
| CH-007-1544-02 | BlackBond T1 | AES (256 bit key) T1 link Encryptor. T1 Base Model with 1 RED and 1 BLACK T1 Port - Slot Card Version |
| | | |
| Base Options | |
| | | |
| -TPS | BlackBond T1 Switch Protection | The T1 Switch Protection provides an automatic backup for T1 circuits with a second T1. The switch over criteria is configured. |
| -ROHS | ROHS compliant materials and processes | Restriction of Hazardous Substances no Pb |
| | | |
| Power Options | Specify as suffix - Combine 2 for Hot Standby |
| | | |
| -DCMOD | Power Module 12/26 VDC/AC ADAPTER | Ships with Universal Adapter 100/240 50/60 |
| -WIREDC | Power Supply Module 12/26 VDC Screw Term | |
| -N48VDC | Power Supply Module Negative 48 Volt DC | Isolated Negative 48 Volt Power |
| | | |
| Rack Mount Option | Specify as Suffix |
| | | |
| -RACKMNT | 19/23" Wide Rack Mount Brackets | Enclosure Nutserts Installed |
