Overview
The IP•Express DLT1 interconnects remote LANs and addresses the large market for connectivity in the multi-megabit bandwidth range such as high quality MPEG Video delivery. The Integration of the T1 CSUs provides for a complete solution with a straight forward configuration. | T1 Branch Office Connectivity
|  |
|
Applications
Two T1 Inverse Packet Multiplexer
|
IP•Express DLT1 is a high performance, bandwidth scalable, IP WAN Router and Bridge with 2 T1 ports offering a standards based inverse multiplexing (N x T1) capability. The 2 T1 ports are able to interconnect to 2 remote locations or optionally to be N x T1 inverse packet multiplexed to remote locations at 3 Mbps. Standards based WAN protocols, PPP, Multilink PPP, and Frame Relay, ensure interoperability.
|
|
MPEG IP Video Redundancy Switch
|
REDundant IP Video configuration automatically switches from the Primary to a Secondary Encoder's IP Video Stream for mission critical broadcasts and is available with the IP•Express DLT1-IPM-RED. A one second absence of IP packets from the Primary Encoder results in the switch to the Secondary Encoder. The WAN bandwidth is reserved for a single feed. |
MPEG IP Multicast Streaming Video
|
IP•Express DLT1-IPM models deliver MPEG IP Streaming Video over Inverse Packet Multiplexed T1s. The Inverse Packet Multiplexer provides the bandwidth necessary for the delivery of broadcast quality video feeds for a single MPEG Video. IP Multicast is a standard feature of the IP•Express DLT1-IPM and is utilized to distribute MPEG video simultaneously to multiple decoders. |
Technical Specifications
| - Network Security:
- • Full On Source, Destination Address;
Port and Flag IP Packet filtering • Network, Device and Application Layers. Dimensions: • 9" (L) x 7.3" (W) x 1.50" (H) • 4 E1 Wan Connectivity in 1/2 of a 19" rack Management: • Telnet support with Edit and Paste Templates • Console Port for Out of Band Management • SNMP support (MIB I, MIB II) • Remote configuration, monitoring, & reset Regulatory: • Safety -IEC60950 • EMC - CFR 47 Part 15 Sub Part B:2002 EN55022:1994+A1&A2 EN55024, ICES-003 1997 CISPR 22 Level A • Telecom - Part68 • CE Power: • Locking Power Connector • 12-24 VDC 1.0A Ships with Universal Adapter • Optional -48V 0.25 Amp • Hot Standby with 2nd Power Module
|
- LAN Network Interface:
• 10/100 BaseT Ethernet Port • Auto-negotiate or Configured - Speed/Duplex
LAN Network Protocols Supported: • IP, TCP, UDP, RIP, ICMP • IP Multicast support • IP Video Stream Redundancy (Optional) WAN Network Interfaces: • Four T1/FracT1 CSU/DSU ports • Inverse Packet Multiplexing (Optional) WAN Network Protocols Supported: • PPP (RFC 1548, RFC 1332, RFC 1334, PAP) • Multilink PPP (RFC 1990) • Frame Relay (ANSI ANNEX D, LMI, RFC 1420) Routing Protocols Supported: • RIPv1, Static- T1/Fractional T1 Specifications:
• Framing - ESF or D4 • Coding - B8ZS or AMI • Supports DS0 assignments from 1 to 24 (64Kbps to 1.536Mbps) T1 Diagnostic: • Loopback Test Network, Internal, Framer, Payload • Bert Tests 2E07,2E11,2E15,QRSS TFTP Online Upgrade Capable: • Fully operational during upgrade
|
How to Order
Ordering Information |
|
How to Order — IP Express DLT1
| Part No. | | Description | | Notes | 076-1544-0x | | IP•Express DLT1, xT1 (x = 1 - 2 Ports) | | Base Model Specify # of T1 Ports Enabled | U76-1544-0x
| | IP•Express DLT1 T1 Port Upgrade
| | Enable Additional T1 Ports (up to 2)
| Base Options | | Specify as Suffix | -IPM | | Inverse Multiplexer Option | | IPM 3 to 6 Mbps Interconnet over 2 Dedicated T1 WANs | -RED | | MPEG IP Video REDundancy Switch | | Secomdary Encoder Traffic passed on failure of Primary Encoder | -ROHS
| | ROHS compliant materials and processes
| | Restriction of Hazardous Substances no Pb
| Power Options | | Specify as Suffix | -DCMOD | | Power 12/30 VDC w LOCKING CONNNECTOR | | Ships with Universal Adapter 90/240 50/60 | -WIREDC | | Power 12/30 VDC Stripped Wire Screw | | | -N48VDC
| | Power Supply Module Negative 48 Volt DC
| | Isolated Negative 48 Volt Power Hot Standby
| Rack Mount Option | | Specify as Suffix | -RACKMNT | | 19/23" Wide Rack Mount Brackets | | Enclosure Nut Serts Installed |
|