IP•Express GE1-IPM

WAN Router with Four Integrated E1 DSU/CSUs

- MPEG Video Distribution -

- Branch Office Connectivity -

- Education District Networking -

Product Image

SIZE

9" (L) x 7.3” (W) x 1.50” (H)

Overview

The IP•Express GE1 interconnects remote LANs and addresses the large market for connectivity in the multi-megabit bandwidth range such as high quality MPEG Video delivery.

The Integration of the E1 CSUs provides for a complete solution with a straight forward configuration.

E1 Branch Office Connectivity

IP•Express GE1 utilizes 4 E1 Telco Circuits to optimally interconnect 4 Remote LANs with IP•Express DLE1s.

Applications

Four E1 Inverse Packet Multiplexer

Inverse Packet Multiplexing is an option of the IP•Express GE1. IPM delivers 3 to 6 Megabits of interconnectivity over 2,3,4 Dedicated E1 WANs. IETF approved RFC1990 Multilink PPP protocol bonds multiple E1s into a high-speed link that has built-in redundancy. E1 line fault detection provides resilient connectivity for Mission Critical Interconnects.

MPEG IP Video Redundancy Switch

REDundant IP Video configuration automatically switches from the Primary to a Secondary Encoder's IP Video Stream for mission critical broadcasts and is available with the IP•Express GE1-IPM-RED. A one second absence of IP packets from the Primary Encoder results in the switch to the Secondary Encoder. The WAN bandwidth is reserved for a single feed.

MPEG IP Multicast Streaming Video

IP•Express GE1-IPM models deliver MPEG IP Streaming Video over Inverse Packet Multiplexed E1s. The Inverse Packet Multiplexer provides the bandwidth necessary for the delivery of 2 broadcast quality video feeds or to deliver near Contribution quality for a single MPEG Video. IP Multicast is a standard feature of the IP•Express GE1 and is utilized to distribute MPEG video simultaneously to multiple decoders.

Specifications

LAN Network Interface
  • 10/100 BaseT Ethernet Port
  • Auto-negotiate or ConfiguredSpeed/Duplex
LAN Network Protocols Supported
  • IP, TCP, UDP, RIP, ICMP
  • IP Multicast support
  • IP Video Stream Redundancy (Optional)
WAN Network Interfaces
  • Four E1/FracE1 CSU/DSU ports
  • Inverse Packet Multiplexing (Optional)
WAN Network Protocols Supported
  • PPP (RFC 1548, RFC 1332, RFC 1334, PAP)
  • Multilink PPP (RFC 1990)
  • Frame Relay (ANSI ANNEX D, LMI, RFC 1420)
Routing Protocols Supported
  • RIPv1, Static T1/Fractional T1 Specifications:
  • Framing - ESF or D4
  • Coding - B8ZS or AMI
  • Supports DS0 assignments from 1 to 24 (64Kbps to 1.536Mbps)
E1 Diagnostic
  • Loopback Test
    • Network, Internal, Framer, Payload
  • Bert Tests
    • 2E07,2E11,2E15,QRS
  • TFTP Online Upgrade Capable
    • Fully operational during upgrade
Network Security
  • Full On Source, Destination Address; Port and Flag IP Packet filtering
  • Network, Device and Application Layers.
Dimensions
  • 9" (L) x 7.3" (W) x 1.50" (H)
  • 4 E1 Wan Connectivity in 1/2 of a 1U 19" rack
Management
  • Telnet support with Edit and Paste Templates
  • Console Port for Out of Band Management
  • SNMP support (MIB I, MIB II)
  • Remote configuration, monitoring, & reset
Regulatory
  • Safety -IEC60950
  • EMC - CFR 47 Part 15 Sub Part B:2002 EN55022: 1994 + A1 & A2 EN55024, ICES-003 1997 CISPR 22 Level A
  • Telecom - Part68
  • CE
Power
  • Locking Power Connector
  • 12-24 VDC 1.0A
  • Ships with Universal Adapter
  • Optional -48V 0.25 Amp
  • Hot Standby with 2nd Power Module

Ordering Information

Chassis Slot Card: IP•Express GE1

Rack Mount & Power Supply Options:

BlackGate RS232 Rear
BlackGate RS232 Rear

Part No.

Description

077-2048-0x*-IPM

IP•Express GE1, *Note: x = specificed number of E1 ports to be enabled (1 to 4)

U77-2048-0x*-IPM

IP•Express GE1 E1 Port Upgrade, Enable Additional E1 Ports (up to 4)

Optional Features

Optional Features

IPM

Inverse Multiplexor Option, IPM 3 to 6 Mbps Interconnet over 2,3, or 4 Dedicated T1 WANs

RED

MPEG IP Video REDundancy Switch, Secondary Encoder Traffic passed on failure of Primary Encoder

CMP

ROHS compliant materials and processes, Restriction of Hazardous Substances no Pb

Power Supply Options

Power Supply Options

094-2418

90-220 VAC Universal International/Domestic Adapter

094-2418-R

DUAL REDUNDANT, 90-220 VAC Adapter

094-N48V

Internal Power Module, -48 VDC Screw Terminals

094-N48V-02

DUAL REDUNDANT, -48 VDC Screw Terminals

094-1500

WIREDC Option, +24 VDC Screw Terminals

094-WIREDC-R

DUAL REDUNDANT, +24VDC

Rack Mount Options

Rack Mount Option

095-1000

Rack Mount Kit - for single 7" products (Fits both 19" and 23" racks)

095-2000

2 unit 19" x 1RU Rack Mount Kit for 7" products

094-WIREDC-R

DUAL REDUNDANT, +24VDC

095-3000-RTANG

Right Angle Wall Mount Bracket Kit

So What's Next?

WE’RE READY!

Engage Communication
9565 Soquel Drive. Aptos, CA 95003
This email address is being protected from spambots. You need JavaScript enabled to view it.
This email address is being protected from spambots. You need JavaScript enabled to view it.



Telephone: 1-831-688-1021
Toll Free : 1-877-ENGAGE4
 
 
Designed, Fabricated, and Assembled
in America 
Supported Worldwide