IP•Tube GT1 SS7 MON

SS7 Over IP

- Monitor SS7 CDRs from Tandem Switches -

  • ROI Measured in Weeks
Product Image

SIZE

9" (L) x 7.3” (W) x 1.50” (H)

Overview

SS7 Protocol Analyzer T1 Probe

The IP•Tube GT1 SS7 MON encapsulates the SS7 Message Signal Units (MSUs), Link Status Signal Units (LSSUs), and optionally Fill-In Signal Units (FISUs) from the T1 monitor interfaces of Telecom Switches into IP packets.

These SS7 Over IP packets are sent to a Central Support Site, with the SS7 Protocol Expertise, where an IP•Tube GT1 SS7 MON receives the SS7 Over IP packets and sends the SS7 Signaling units out four separate T1 interfaces or multiplexed onto a single T1 interface to an SS7 Protocol Analyzer.

The IP•Tube GT1 SS7 MON has from 1 to 4 T1 interfaces that have the sensitivity, -36dB, to be connected to high impedance T1 Monitor jacks. The 4 T1 interface configuration provides for the simultaneous monitoring of the SS7 Signaling Units from Tandem Telco Switches.

  • Telco Switches
  • Signal Transfer Points
  • Mobile Switching Centers
  • Home Location Registers

The IP•Tube GT1 SS7 MON transparently transports SS7 messages over IP networks. SS7 signaling network elements such as local and tandem switches, Mobile Switching Centers, Signal Transfer Points and Home Location Registers that are interconnected to remote network elements by IP•Tube GT1 SS7 MONs are able to transmit their signaling messages over cost effective and flexible IP networks.

IP•Tube GT1 SS7 MON Standard Features

Industry Standard SS7 Framer

The IP•Tube GT1 SS7 MON uses an industry standard SS7 Framer to receive and transmit SS7 messages. Minimal IP bandwidth is required to deliver SS7 since only Message Signal Units (MSUs), Link Status Signal Units (LSSUs) SS7 frames are encapsulated into IP packets. 

Assured Delivery Protocol

In order to assure high quality communications over links with intermittent or noisy performance, such as Wireless or Broadband over Power Line, the IP•Tube GT1 SS7 MON employs Engage’s robust Assured Delivery Protocol with the following benefits: 

• Packet out of sequence detection and re-sequencing
• Duplicate skipping,
• Lost packet retransmission with configured delay.

Dual LAN Interfaces

All IP•Tube GT1 models ship with dual 10/100BaseT Ethernet LAN ports. The dual Ethernet interfaces provide for: 
• Management interface on LAN port 2 when LAN port 1 is connected to a VPN tunnel 
• The LAN ports can be configured to support connections over 2 opposite ADSL links 
• Alternator Option for load balanced SDSL interconnects 
• Protector Option for Redundant Packet Path connections with Constant or Switch Over Criteria 

Service Quality Packet Prioritizing

The IP•Tube GT1 uses the Type of Service byte in the IP packets and 802.1p/q mac level prioritization to prioritize the encapsulated SS7 Messages.

VPN Network Management

Interconnecting the IP•Tube GT1 through a Virtual Private Network with a sufficient real time committed information rate ensures that the required quality of service is provisioned. The IP•Tube GT1's second Ethernet interface provides a management port when the first Ethernet interface is connected to a VPN. Each Ethernet LAN interface features independent IP network configurations.

IP•Tube GT1 SS7 MON Optional Features

T1 Mutiplexor OPTION -MUX

The IP•Tube GT1 SS7 MON  with the MUX option has the ability to support remote SS7 messaging taps from 24 remote SS7 timelsots. A single SS7 Analyzer with 24 DS0s is able to simultaneously analyze 12 links.

SS7 Sniffer OPTION -SNIF

SS7 Packets are enveloped in a SIGTRAN header so that an Ethernet Protocol Analyzer with an SS7 protocol decoder can be utilized to capture and analyze the IPTubes' SS7 Over IP traffic.

Protector OPTION -PRO

The protector option utilizes the second LAN interface as a redundant path for the interconnection of the IP encapsulated T1 Circuit. The extension of the T1 circuit has a fault tolerant link that is configured to always on, or with switch over criteria.

Pay-As-You-Grow Field Upgrades

The IP•Tube GT1 SS7 MON has configurations with 1 to 4 integrated T1 interfaces each of which supports 1 to 31 SS7 Communication links. Designed for Pay-As-You-Grow expansion. Customers can elect to economize initial installation by purchasing a single active T1 port, and then enabling additional SS7 DS0s or T1 ports via an option license key.

Rack Mount Kit

The IP•Tube family is ready for your most demanding central office or data center environments. With the Rack Mount Kit, IP•Tube products are easily installed in 19" and 23" racks. Easy access to both front and rear sides facilitates technician maintenance procedures.

Applications

Remote SS7 Switch Analysis

Telecommunication Service Providers utilize IP•Tube GT1 SS7 MONs to facilitate the analysis of remote Telecom Switches over IP networks. A single centralized SS7 Protocol Analyzer is able to analyze a multisite network of Telecom switches whose SS7 communications are being probed with the IP•Tube GT1 SS7 MON.

SS7 protocol analyzer expertise is only required at the Central location. Analysis of an SS7 Telecom switch can be performed simply by enabling its IP•Tube GT1 SS7 MON to stream the SS7 messages to the IP•Tube GT1 SS7 MON connected to the SS7 protocol analyzer.

Low Cost IP Services, such as DSL Internet, have sufficient bandwidth to deliver the SS7 Over IP packets. SS7 Over IP network bandwidth utilization is limited to SS7 MSUs and LSSU.

No Cost Ethernet Protocol SS7 Analyzer

Sigtran formatted SS7 Over IP results in the a very low cost SS7 analysis.

Deployment Flexibility

Widely available commercial and private IP networks provides the SS7 network designer with competitive options for interconnecting the signaling points.

Tandem Telco Switch
SS7 Over IP

SS7 (Signaling System 7) separates the information required to set up and manage telephone calls in the Public Switched Telephone Network (PSTN) onto a separate packet switched network (Signaling Network). It uses Message Signal Units (MSUs), Link Status Signal Units (LSSUs), and Fill-In Signal Units (FISUs) as signal units. The main protocols include MTP (Message Transfer Part – Level 1 to 3), SCCP (Signaling Connection Control Part), and ISUP (ISDN User Part).
SS7 Ethereal Monitor Probe 

Specifications

LAN Network Interface
  • Two 10/100BaseT Full/Half Ethernet
  • Auto negotiation or Configurable Speed and Duplex 
LAN Network Protocols Supported
  • IP, TCP, UDP, ICMP
1 to 4 Duplicate Packet Transmission
  • Resilient performance through a lossy interconnect. 
T1/Fractional T1 Specifications
  • One to Four Port Models 
  • Connects directly to T1 or DS1
  • Framing - ESF or D4
  • Coding - B8ZS or AMI
  • Supports DS0 assignments from 1 to 24
  • Non Contiguous Configuration x-y,z Supported 
T1 Over IP Protocol
  • SS7 Frame UDP encapsulation with Assured Delivery
  • Transmission Control Protocol (TCP) 
  • Network Tranparent - no point code required
  • Type of Service and Mac layer 802.1p/q QOS
TFTP Online Upgrade Capable (FLASH ROMs)
  • IPTube is fully operational during upgrade
Quality of Service Support
  • IP Type of Service (TOS) CLI configurable 
  • IANA Registered UDP Port 3175
  • 802.1p/q mac level prioritization
Dimensions
  • 9" (L) x 7.3" (W) x 1.50" (H)
Management
  • Telnet support with Edit and Paste Templates
  • Console Port for Out of Band Management
  • SNMP support (MIB I, MIB II) with configurable traps
  • Remote configuration, monitoring, & reset
  • Telco Diagnostics: Local Loop, Remote Loop
Regulatory
  • Safety -IEC60950
  • EMC - CFR 47 Part 15 Sub Part B:2002 EN55022: 1994 + A1 & A2 EN55024, ICES-003 1997 CISPR 22 Level A
  • Telecom - Part68
  • CE
Rear Panel/Power
  • 12-24 VAC/VDC, 1.0A. International Adapters Available
  • Optional -48V 0.25 Amp
  • Hot Standby with 2nd Power Module

Ordering Information

Rack Mount & Power Supply Options:

BlackGate RS232 Rear
BlackGate RS232 Rear

Part No.

Description

SS7-1544-0x*-yy

IP•Express GT1 SS7 MON, *Note: x = specificed number of enabled T1 ports (1 to 4); 1-24 SS7 DS0s yy

Optional Features

Optional Features

CMP

ROHS compliant materials and processes, Restriction of Hazardous Substances no Pb

SNIF

SS7 Packets are enveloped in a SIGTRAN, Facilitates use of Ethernet Protocol Analyers w SS7 Decode

MUX

T1 Multiplexor and DACS, Groom 2 to 24 remote locations Over IP

PRO

Protector Option, Fault Tolerant Network Interconnect. The protector option utilizes the second LAN interface as a redundant path for the interconnection of the IP encapsulated data. The extension of the IP-Tube has a fault tolerant link that is configured to always on, or with switch over criteria.  Learn more.

Power Supply Options

Power Supply Options

094-2418

90-220 VAC Universal International/Domestic Adapter

094-2418-R

DUAL REDUNDANT, 90-220 VAC Adapter

094-N48V

Internal Power Module, -48 VDC Screw Terminals

094-N48V-02

DUAL REDUNDANT, -48 VDC Screw Terminals

094-1500

WIREDC Option, +24 VDC Screw Terminals

094-WIREDC-R

DUAL REDUNDANT, +24VDC

Rack Mount Options

Rack Mount Option

095-1000

Rack Mount Kit - for single 7" products (Fits both 19" and 23" racks)

095-2000

2 unit 19" x 1RU Rack Mount Kit for 7" products

094-WIREDC-R

DUAL REDUNDANT, +24VDC

095-3000-RTANG

Right Angle Wall Mount Bracket Kit

So What's Next?

WE’RE READY!

Engage Communication
9565 Soquel Drive. Aptos, CA 95003
This email address is being protected from spambots. You need JavaScript enabled to view it.
This email address is being protected from spambots. You need JavaScript enabled to view it.



Telephone: 1-831-688-1021
Toll Free : 1-877-ENGAGE4
 
 
Designed, Fabricated, and Assembled
in America 
Supported Worldwide