IP•Tube CEP 202T
9" (L) x 7.3” (W) x 1.50” (H)
Image is not available

Bell 202 T 4-Wire Modem Over IP MPLS Ethernet

Image is not available
Image is not available

Rear Panel: 12/30 VDC ADAPTER (option)

Image is not available

Rear Panel 12/30 VDC with Screw Term Adapter (option)

Image is not available

Rear Panel 12/30 VDC with Negative 48 VDC Screw Term Adapter (option)


IPTube CEP 202 T

Bell 202 T 4-Wire Modem Over IP MPLS Ethernet


Flexible Bell 202 Serial Data Extensions over Packet Networks 

The IPTube CEP 202 T has integrated Bell 202 T modem interfaces that connect to the Bell 202 T 4 Wire modem interface of Data Communication Equipment and transports their serial communication over IP & MPLS Packet networks. This conversion facilitates a cost effective path for Utility and Pipeline industries to migrate their SCADA communication from end of life analog circuits to Ethernet based LAN/WAN/MAN wired and wireless networks.

Utility and Pipeline industries use 4 wire leased line communication circuits to connect remote SCADA equipment to control centers. A significant number of SCADA Remote Telemetry Units only have integrated 4 wire modem interfaces. The IPTube CEP 202 T extends the life of proven SCADA systems by converting 4 Wire modem interfaces to Ethernet for IP or MPLS Packet network connectivity. 



The IPTube CEP 202 T interfaces directly to the 4 wire analog interface of the RTU, transparently encapsulates SCADA protocols from the RTU into IP packets, and transports those packets onto the IP network. At the control center, the central site CEP 202T seamlessly converts the packets back into their original 202T modem data format; or directly to an RS232 DCE interface with an IPTube CEP RS232.


IPTUBE MOT202T TO RS232 Over IP web.


Asynchronous Serial Over IP
Asynchronous characters with 5 to 8 data bits, a baud rate 1.2 kilobits, 1 or 2 stop bits, and with or without parity are efficiently encapsulated into IP packets. The latency is controlled by setting the maximum number of consecutive async characters per IP packet.

SCADA Protocol Transparency
The IPTube SER 202T transports legacy bit or byte SCADA protocols transparently because of its unique TDM circuit emulation capability. RTU transmit data is encapsulated into IP packets at 64,000 samples per second and de-encapsulated at the far end at the same rate, ensuring proper RTU receive data delivery. Multiple RTUs can be IP multiplexed onto T1 circuits for routing to existing cross-connect and channel bank equipment.  Multiple RTUs can be IP multiplexed onto T1 circuits for routing to existing cross-connect and channel bank equipment.

IPTube CEP 202 T Standard Features

Dual LAN Interfaces
All IPTube CEP 202T models ship with dual 10/100 BaseT Ethernet LAN ports. The dual Ethernet interfaces provide for:
• Management interface on LAN port 2 when LAN port 1 is connected to a VPN tunnel
• Protector Option for Redundant Packet Path connections with Constant or Switch Over Criteria

Assured Delivery Protocol
In order to assure high quality communications over links with intermittent or noisy performance, such as Wireless, the IPTube CEP 202T employs Engage’s robust Assured Delivery Protocol with the following benefits:

Packet out of sequence detection and re-sequencing
Duplicate skipping
Lost packet retransmissions with configured delay 
IPTube CEP 202T Optional Features 
Protector OPTION -PRO
The protector option utilizes the second LAN interface as a redundant path for the interconnection of the IP encapsulated Bell 202 T data. The extension of the Bell 202T has a fault tolerant link that is configured to always on, or with switch over criteria.

Engage Communication
9565 Soquel Drive. Aptos, CA 95003

Telephone: 1-831-688-1021
Toll Free : 1-877-ENGAGE4
Designed, Fabricated, and Assembled
in America 
Supported Worldwide