IP•Tube E1 Compression: 32 DS0s with 40 to 1 Compression

Scenario: This sample configuration details an IP•Tube interconnect of a Full E1 with compression enabled. Note: E1 compression does not need to bebe without framing bits. DS0 1 through 32 are transported. This IP•Tube is set to internal timing as the master clock of the IP•Tube's T1 connection. The remote IP•Tube must be set to use its Phase Lock Loop to match this frequency. Note: the remote IP•Tube is across a WAN whose IP address range is 192.168.2.x. The WAN router address is 192.168.1.4 this is the address for the Default Router.

# Config File Name
# IPTE1fullCompressionINT.txt
# Command Line Listing
Host Name IP•Tube-T1 Compression Master Clock
IP Default-router 192.168.1.4
Interface E1
# IP Address of this IP•Tube
IP Address 192.168.1.1/24
# Ethernet Broadcast/Multicast Reception Control
BroadcastRCV ON
Interface S1
Type E1
# Tube Parameters
Protocol IPTube
Tube On
Tube Framing Transparent
# IP Address of remote IP•Tube
Tube Address 192.168.2.1
Tube TOS 0x08
Tube Buffers 10
# Note Echo Cancellation Required
Tube FPP 40
Tube Compression ON
# Tube Destination Ethernet Address Resolution
Tube Ethernet ARP ON
Tube Ethernet Address
# E1 Parameters
E1 Data Normal
# E1 Transmit timing set to Internal
E1 Clocking Internal
E1 Framing CRC4
E1 Coding HDB3
E1 IdleCharacter 0x7F
E1 Channels Full