IP•Tube Fractional E1: 8 DS0s without E1 Framing Byte

Scenario: This sample configuration details an IP•Tube interconnect of a fractional E1 without framing byte. E1 framing is generated locally. DS0 1 through 8 are transported. This IP•Tube is set to internal timing as the master clock of the IP•Tube's E1 connection. The remote IP•Tube must be set to use its Phase Lock Loop to match this frequency.
Note: the remote IP•Tube is across a WAN whose IP address range is 192.168.2.x. The WAN router address is 192.168.1.4 and is the address for the Default Router.

# Config File Name
# IPTE1fracwanINT.txt
# Command Line Listing
Host Name IPTube E1 Master Clock
IP Default-router 192.168.1.4
Interface E1
# IP Address of this IP•Tube
IP Address 192.168.1.1/24
Interface S1
Type T1
Protocol IPTube
Tube On
Tube Framing Transparent
# IP Address of remote IP•Tube
Tube Address 192.168.1.2
Tube UDPPort 3175
Tube TOS 08 Hex
Tube Buffers 5
Tube FPP 12
Tube Compression Off
# Tube Destination Ethernet Address Resolution
Tube Ethernet ARP On
Tube Ethernet Address

E1 Data Normal
# E1 Transmit timing set to Internal
E1 Clocking Internal
E1 Framing CRC4
E1 Coding HDB3
E1 IdleCharacter 0x7F
# START CHANNEL NUMBER OF CHANNELS
E1 Channels Fractional 1 8