IP•Tube-E1 Full 31 DS0s with E1 Framing Byte

Scenario: This sample configuration details an IP•Tube-E1 interconnect of a full E1 with framing bits. All 31 DS0s are transported. Note: the IP•Tube adds overhead in its conversion of E1 to IP packets so that the full E1 frame rate of 2,048,000 requires 2,250,000 bits per second of interconnect bandwidth.

# Config File Name
# IPTE1FullwFramingPLL.txt
# Command Line Listing
Host Name IP Tube E1
IP Default-router
IP Cost 1
Interface E1
# IP Address of this IP•Tube
IP Address 192.168.1.1/24
# Ethernet Broadcast/Multicast Reception Control
BroadcastRCV ON
Interface S1
Type E1
# Tube Parameters
Protocol IP•Tube
Tube On
Tube Framing E1Framed
# IP Address of Remote IP•Tube
Tube Address 192.168.1.2
Tube UDPPort 3175
Tube TOS 08 Hex
Tube Buffers 5
Tube FPP 12
Tube Compression Off
# Tube Destination Ethernet Address Resolution
Tube Ethernet ARP On
Tube Ethernet Address

# E1 Interface Configuration Parameters
E1 Data Normal
# E1 Transmit timing set to Phase Lock Loop
E1 Clocking PLL
E1 Framing CRC4
E1 Coding HDB3
E1 IdleCharacter 0x7F
E1 Channels Full