IP•Tube-T1 Full 24 DS0s with T1 Framing Bits

Scenario: This sample configuration details an IP•Tube interconnect of a Full T1 with framing bits. Note that the IP•Tube adds overhead in its conversion of T1 to IP packets so that the full T1 frame rate of 1.544 Mbps requires 1.906 Mbps of interconnect bandwidth on the Ethernet side. See Chapter 5: T1/E1 Configuration and Operation for a complete description of the overhead associated with encapsualtion of T1/E1 frames into IP packets.

 

# Config File Name
# IPTT1FullwFramingPLL.txt

#Command Line Listing
HostName IPTube T1
IP Default-router
Interface E1
# IP Address of this IP•Tube:
IP Address 192.168.1.1/24
# Ethernet Broadcast/Multicast Reception Control
BroadcastRCV ON
Interface S1
Type T1
# Tube Parameters
Protocol IPTube
Tube On
Tube Framing T1Framed
# IP Address of remote IP•Tube:
Tube Address 192.168.1.2
# Tube Destination Ethernet Address Resolution
Tube TOS 08 Hex
TubeUDPPORT 3175
Tube Buffers 5
Tube FPP 8
Tube Compression Off
Tube Ethernet Arp On
Tube Ethernet Address

# T1 Parameters
T1 Data Normal
# T1 Transmit timing set to Phase Lock Loop:
T1 Clocking PLL
T1 LBO CSU 0dB
T1 Framing ESF
T1 Coding B8ZS
T1 IdleCharacter 0x7F
T1 Channels Full