FOR
IMMEDIATE RELEASE
Press Contact: Tina Soules
Engage Communication, Inc.
(831) 688-1021; Tina@engageinc.com
Engage
Communication Announces support for SS7 Over IP
APTOS, Calif., December 2, 2003 - Engage
Communication, Inc. incorporates SS7 Over IP
protocol into a new IPTube product line the IPTubeSS7SIGs.
The
IPTubeSS7SIG
transports SS7 messages over IP networks. SS7 signaling
network elements such as local and tandem switches, Mobile
Switching Centers, Signal Transfer Points and Home Location
Registers that are interconnected to remote network elements
by IPTubeSS7SIGs
are able to transmit their signaling messages over cost
effective and flexible IP networks.
The IPTubeSS7SIG
is available with T1, E1, V.35 or RS530 physical interfaces
to connect to the SS7 Telecommunication equipment's communication
link.
IPTubeSS7SIGT1
IPTubeSS7SIGE1
IPTubeSS7SIGV35
IPTubeSS7SIGRS530
The T1 and E1 Models are also available
with 2nd T1 or E1 Drop and Insert interface for direct
connection to the SS7 DS0..
Traditional
transmission equipment such as TDM multiplexers (MUXs)
and digital cross-connects are not required.
IPTubeSS7SIGDIT1
IPTubeSS7SIGDIE1
"IP Tubes with SS7 Over IP
enables interconnection of SS7 Signalling Elements over
very cost effective and readily available IP data services"
said Mark Doyle, Engage Communication President. "56
Kilobit modem connections even provide sufficient bandwidth
since the FISUs and LISUs are filtered out and only the
SS7 messages require bandwidth."
About Engage Communication
Engage Communication, incorporated in September 1989,
develops, manufactures, sells and supports premium networking
and telecommunication solutions.