|
Technical
Specifications
|
Dimensions:
• 9” (L) x 7.3” (W) x 1.50” (H)
Power:
• 12/24 VAC/DAC, 1.0A • Optional 12-36 VDC 1.0A
• Optional -48V 0.25 Amp (Int. Adapters Available)
Rear
Panel AC:
Telco: E1/DS1 Interface for connection to a PBX,
telecom switch/multiplexor.
Console: Standard 10BaseT Ethernet interface
Port Connector
• RJ 45 to DB 9 Male Adapter.
AC
Power Back Panel
DC
Power Back Panel
 |
- LAN
Network Interface:
• 10BaseT Ethernet
-
- LAN
Network Protocols Supported:
• IP, TCP, UDP, ICMP, BOOTP
E1 Over IP Protocol:
• TDM Over IP
• Circuit Extension Services Over IP - CESOIP
• HDLC Over IP - HDLCOIP
• Frames Per Packet Configurable 8 to 40
• Low Latency Mode: 1 millisecond 8 E1 frames
• Max Payload Mode: 5 millisecond 40 E1 frames
Regulatory:
• Safety -IEC60950 - •EMC
- CFR 47 Part 15 Sub Part B:2002,
EN55022:1994+A1&A2, EN55024, ICES-003 1997
CISPR 22 Level A
- •
Telecom - Part68
- •
CE
Quality of Service Support:
• IP Type of Service (TOS) CLI configurable
• IANA Registered UDP Port 3175TFTP Online Upgrade Capable
(FLASH ROMs)
• IPTube is fully operational during upgrade
Management:
• Telnet support with Edit and Paste Template Files
• Console Port for Out of Band Management
• SNMP support (MIB I, MIB II)
• Remote configuration, monitoring, & reset. |
