|E1 Voice Over IP
The IP•Tube DLE1-Ecan encapsulates full and fractional E1 circuits into IP packets. E1 Over IP connections provide for the interconnection of PBXs, Channel Banks and Telecom Switches via LANs, WANs, MANs, Satellite and Wireless Ethernet.
The IP•Tube DLE1-Ecan has an integrated E1 Echo Canceller that cancels up to 64 milliseconds of Far End echo. The echo canceller meets ITU-T G.164, G.165 and ITU-T G.168 requirements for echo cancellation.
The IP•Tube DLE1-Ecan’s transparent operation maintains the proprietary signaling required to support PBX features such as call conferences, call forwarding, caller ID and SS7.
PRI ISDN, SS7, and Proprietary out of band are supported. Echo cancellation is automatically disabled during FAX and Modem communications. Transparent support for Modem or Fax. Voice quality is not compromised. Legacy phone equipment investment is preserved.
- VPN Network Management
- Interconnecting the IP•Tube DLE1-Ecan through a Virtual Private Network with sufficient real time committed information rate ensures that the required quality of service is provisioned. The second Ethernet interface provides a management port. Each LAN interface features independent IP network configurations.
IP•Tube DLE1-Ecan OPTIONS
Data Compression Option -C
- The IP•Tube DLE1-Ecan-C continuously detects idle and redundant data within each E1
Voice circuit resulting in as much as a 40 to 1 bandwidth savings.
TDM over IP WAN bandwidth is not consumed by silent or redundant
Note: Compression only supported with IPTube•DLE1-Ecan-C
Protector OPTION -PRO
The protector option utilizes the second LAN interface as a redundant path for the interconnection of the IP encapsulated E1 Circuit. The extension of the E1 circuit has a fault tolerant link that is configured to always on, or with switch over criteria.
Protector OPTION -EnPRO
The Enhanced version has configuration parameters that enable a secondary packet path with high relative delay to primary path be synchronized. The packet sequence delay synchronization ensures concurrent redundancy with a high degree of error tolerance. Error free operation is accomplished when a primary or secondary Packet is not received and a redundant duplicate packet is available. The IPTube also supports the transmission of multiple duplicate packets to support Mission Critical Circuit extension with redundancy that is only limited by the bandwidth provisioned.
E1 Switch OPTION -SWT
The E1 switch option enables the E1 Port 1 interface to be manually switched between a E1 circuit connected to E1 Port 2 or to E1 Over IP packets connected with the remote IPTube.
• Remote Control of E1 Connection to Telco or E1overIP
• Installation performed by a single Technician
• Quick reversion to Telco during debug of E1overIP
E1 Link Protector OPTION -LPT
The E1 Link Protector provides an automatic back up for E1 circuits with E1 Over IP connecting via Wireless Ethernet, Gigabit Ethernet, IP Satellite Services, xDSL,....
• Automatic Protection Switch for E1 Circuit
• Deliver on Stringent Service Level Agreements
• Back Up for Mission Critical Connectivity
• Disaster Recovery for Public Safety Network
DS0 Timeslot Multiplexor OPTION -MUX
The IP•Tube DLE1-ECAN-MUX maps DSOs from a central site to as many as 31 remote locations via an IP/Ethernet connection. Get maximum use of expensive DS1 interfaces on PBX, Channel equipment and datacom gear. Also provides Virtual DACS Over IP capability. Mesh DS0s one-to-many or many-to-many.
Rate Limiter OPTION -RLM
The IP•Tube DLE1-ECAN-RLM Rate Limiter option limits the WAN bandwidth utilized by the LAN1 to LAN2 bridge. Rate Limiting the traffic enables the reservation of the WAN bandwidth for time the sensitive E1 Over IP real time connections. Great for Wireless WAN E1 applications. Rate Governing is only applied in the direction to the WAN to minimize latency. The data rate governor utilizes Time Division Multiplexing based clocking to provide for Nx64, NxE1 and NxFT3 bandwidth regulation that is configured from 64 kilobits up to 45Mbits.
Alternator Load Balancing OPTION -ALT
The IP•Tube DLE1-Ecan-ALT Alternator option alternatively sends the IP packetized E1 frames on LAN 1 and LAN 2. The Alternator option enables fractional and full E1 circuits to be split over two IP WAN connections such as xDSL. The Lossless Data Compression option can be combined with the Alternator option to minimize the bandwidth required from the alternative paths.
Pay-As-You-Grow Field Upgrades
The IP•Tube DLE1 Ecan are designed for Pay-As-You-Go
growth from 1 E1 to 2 E1s. Customers can elect to economize
initial installations, buy purchasing a single active E1 port
and enable the additional E1 Port via a software-based license
key. NOTE: Each E1 Port has its own DSP Echo Cancellation hardware that is installed during assembly so it is NOT possible to field upgrade.
Field Upgrade benefits are extended to our Industry-Best Loss
less Data Compression. Just as E1 ports are field upgrade able,
so is Loss less Data Compression. At any time, each E1 port
on the IP-Tube DLE1-Ecan can be upgraded to Loss less Data Compression
with a simple software-based license key installation. If you
determine that your IP•Tube DLE1-Ecan is best deployed
with Loss less Data Compression, your still in business with
the per port field upgrade!
|Rack Mount Kit
The IP-Tube family is ready for central office or data center
environments with 19" and 23" Rack Mount Kits.