|
Technical
Specifications
|
- Automatic Protection Switch :
- • Configured T1 Switch Criteria Alarms: Red, Yellow, CRC
• Proactive Circuit to Packet with Assured Delivery and
Hot Backup
Environmental:
• 0°
to 132° F (-10° to 50°C ) operating temperature
• Up
to 90% operating humidity (non-condensing)
• Optional
Extended Temperature Range available
Regulatory:
• CE
• Safety
-IEC60950
• EMC
- CFR 47 Part 15 Sub Part B:2002, EN55022:1994+A1&A2, EN55024,
ICES-003 1997, CISPR 22 Level A
• Telecom Part 68
Management:
• Telnet
support with Edit and Paste Template Files
• Console
Port for Out of Band Management
• SNMP
support (MIB I, MIB II) with configured traps
• Remote config., monitoring, & reset
• Telco
Diagnostics:
• Local
Loop, Remote Loop
Echo Canceller Module (Option):
• Voiceband Echo Cancelling according to
ITU G.165 and G.168
• u- and A-Law coding according to ITU G.711
• 24 channels with end echo path delay of
less than 63.75 ms
|
Encryption
Algorithm:
• AES 256-bit
• Fully Automatic key management
T1/Fractional T1 Specifications:
• 1 RED and 1 BLACK T1
• Integrated CSU Connects to Telco T1
or with a crossover cable to DS1
• Framing - ESF or D4
• Coding - B8ZS or AMI
• Supports even multiples of DS0 assignments
from 1 to 24
• Not Contiguous Configuration x-y,z
SupportedLAN
Network Interface:
• Two 10/100BaseT Full/Half Ethernet
• Auto negotiation or Configured Speed and Duplex
LAN
Network Protocols Supported:
• IP, TCP, UDP, ICMP
• Telnet TFTP Online Upgrade Capable (FLASH ROMs)
• BlackBond is fully operational during upgrade
Dimensions:
•
9" (L) x 7.3” (W) x 1.50” (H)
• Optional Medeco Case
Power:
• 12-30 VDC, 1.0A.
• Locking Connector
• Optional -48V 0.25 Amp
• Hot Standby
|
|
