FOR
IMMEDIATE RELEASE
Press Contact: Tina Soules
Engage Communication, Inc.
(831) 688-1021; Tina@engageinc.com
Engage Communication Delivers
the IPExpressMLT-DI-H - a combination: T1 IP WAN Router;
T1 Drop and Insert Multiplexor and a Four Port 10 BaseT
Hub.
APTOS, Calif., June 20, 2002 -
Engage Communication, Inc. delivers the IP·Express·MLT-DI-H
to a Wireless Infrastructure Manufacture. The IP·Express·MLT-DI-H
is being used to interconnect GSM
Base Stations to Base Station Controllers. The
integrated Ethernet Hub provides for an always on IP based
network connection to the Ethernet Management interface
of the GSM Base Stations. The Base Station's T1 TDM interface
is multiplexed through the Drop
and Insert interface onto the T1 WAN. The 24 Volt DC power
option is being utilized.
IP·Express·MLT-DI-H
is a Wide Area Network router, with an integrated Ethernet
Hub, that routes the Internet Protocol through a T1 Interface
that is Multiplexed with a built-in Drop and Insert Mux.
Wide Area Networking Point to Point and Frame Relay Protocols,
with 24/7 proven interoperability, are fully supported
on the T1 channels allocated to the internal WAN Router.
The IP·Express·MLT-DI-H's
T1 Drop
and Insert interface provides for the transparent
interconnection of PBXs and Telecom Switches via the T1
WAN connection.
"This product delivery shows our ability to react
quickly to customer product requirements. Our IPExpress-MLT-DI
was adapted to be DC Powered and to have an integrated
Ethernet Hub. Engage delivered production grade product
in less than 3 months from order." said Mark Doyle
Engage Communication President.
About Engage Communication
Engage Communication, incorporated in September 1989,
develops, manufactures, sells and supports premium networking
and telecommunication solutions.