Press Contact: Tina Soules
Engage Communication, Inc.
(831) 688-1021; Tina@engageinc.com
Engage Communication Delivers
the IPExpressMLE-DI-H - a combination: E1 IP WAN Router;
E1 Drop and Insert Multiplexor and a Four Port 10 BaseT
APTOS, Calif., June 20, 2002 -
Engage Communication, Inc. delivers the
to a Wireless Infrastructure Manufacture for Celluar Telephony
installations in Central Asia. The IP·Express·MLE-DI-H
is being used to interconnect GSM
Base Stations to Base Station Controllers. The
integrated Ethernet Hub's connection to the WAN Router
provides for an always on IP network connection to the
Ethernet Management interface of the GSM Base Stations.
The Base Station's E1 TDM interface is multiplexed through
the Drop and Insert interface
onto the E1 WAN. The 24-36 Volt DC power option is being
is a Wide Area Network router, with an integrated Ethernet
Hub, that routes the Internet Protocol through an E1 Interface
that is Multiplexed with a built-in Drop and Insert Mux.
Wide Area Networking Point to Point and Frame Relay Protocols,
with 24/7 proven interoperability, are fully supported
on the E1 channels allocated to the internal WAN Router.
Drop and Insert interface provides for the
transparent interconnection of PBXs and Telecom Switches
via the E1 WAN connection.
"This product delivery shows our ability to react
quickly to customer product requirements. Our IPExpress-MLE-DI
was adapted to be DC Powered and to have an integrated
Ethernet Hub. Engage delivered production grade product
in less than 3 months from order." said Mark Doyle
Engage Communication President.
About Engage Communication
Engage Communication, incorporated in September 1989,
develops, manufactures, sells and supports premium networking
and telecommunication solutions.